by Gary Mintchell | Oct 31, 2016 | Automation, News, Safety, Software, Technology
I have a little batch of process automation and industry news involving predictive technologies—two acquisitions and a new safety product. Congratulations to Mike Brooks and the team at Mtell for a good exit. Also congratulations to the MaxEAM folks. Finally, an important new take on process automation safety from PAS.
MTell Acquired by Aspen Technology
Aspen Technology Inc., a provider of software and services to the process industries, announced it has acquired Mtelligence Corp. (known as Mtell), a San Diego, California-based pioneer in the field of predictive and prescriptive maintenance for asset performance optimization.
Mtell products enable companies to increase asset utilization and avoid unplanned downtime by accurately predicting when equipment failures will occur, understanding why they will occur, and prescribing what to do to avoid the failure.
The products provide a low-touch, rapidly deployable, end-to-end solution that combines a deep understanding of operations and maintenance processes, real-time and historical equipment data and cutting-edge machine learning technologies. As a result, customers can:
- Monitor the health of equipment, detect early failure symptoms, diagnose their root-cause and recommend the best responses to avoid the failure
- Continually learn and automatically adapt to changing equipment and process behaviors
- Automatically share findings across a network of similar equipment to improve the overall process performance.
Some of the world’s largest process manufacturing companies use Mtell. Customer results have shown significant benefits including improved industrial safety, removal of risk, reduced failures, enhanced productivity and increased profitability.
Mtell products include:
- Previse – Mtell’s flagship end-to-end machine learning solution that monitors equipment health 24/7, detects early indicators of degradation or failures, diagnoses the root cause and prescribes responses that prevent breakdowns and unplanned downtime.
- Basis – A connected condition monitoring application that facilitates collaboration between operations and maintenance organizations to determine the best course of action for equipment alert conditions.
- Reservoir – A high performance, scalable, big data repository that captures, manages and synchronizes large volumes of time series, event and asset data from multiple sources.
- Summit – A remote monitoring center application for monitoring, analyzing and benchmarking asset performance.
The purchase price of the transaction was $37M. Additional terms are disclosed in AspenTech’s Quarterly Report on Form 10-Q for the first quarter of Fiscal 2017 filed with the United States Securities and Exchange Commission.
Schneider Electric Adds to Asset Management Portfolio
Schneider Electric, the global specialist in energy management and automation, announced the acquisition of MaxEAM, a software company with complementary applications that extend Avantis.PRO Enterprise Asset Management. The acquisition further solidifies the portfolio and adds valuable domain expertise to Schneider Electric’s existing team.
Schneider Electric and MaxEAM have a long standing business relationship working together to deliver successful customer projects on a global scale. The acquisition gives customers a single point of contact for support and delivery services, and more closely aligns future product development.
“The strength of our asset management portfolio continues to grow, both organically and through acquisition. MaxEAM enhances the functionality of our Avantis.PRO offering, securing the investment our customers have made in our products,” said Rob McGreevy, Global Vice President, Software at Schneider Electric. “The addition of MaxEAM subject matter expertise and technology will allow us continued expansion of our industry-leading Enterprise APM platform.”
“Our advanced technology linked to mobile work execution streamlines processes, adding tremendous capabilities for mobile workers,” said Eric Stern, President of MaxEAM. “Schneider Electric’s Enterprise APM platform is the broadest in the market today. I’m excited that our people and technology will be an integral component to the overall offering.”
Two years ago Schneider Electric acquired InStep Software, adding advanced predictive analytics. That acquisition furthered its delivery of Enterprise APM solutions leveraging the Industrial IoT, helping to close the gap between IT and OT.
PAS Launches Process Safety Analytics Software
PAS Inc., the solution provider of process safety, cybersecurity, and asset reliability for the energy, power, and process industries announces the general availability of its newest product, PAS IPL Assurance. The software provides real-time predictive analytics on the health and availability of the safety instrumented systems (SIS), Alarm Management Systems, and other Independent Protection Layers (IPL). In addition to managing operational risk, IPL Assurance reduces compliance costs by automatically reporting on the SIS performance during a demand on the safety system.
PAS IPL Assurance delivers actionable information on safety instrumented systems, alarm systems, control loops, and operational boundaries to streamline compliance activities and expose operational risk. As a result, plant personnel can mitigate abnormal situations before they impact plant safety, reliability, and profitability.
IPL Assurance provides the following analytics, alert, and visualization features:
• Safety instrumented function (SIF) performance management,
• Testing and maintenance management,
• Demand on safety system rate tracking,
• Status of safety related alarms,
• Safety system bypass management, and
• Safety and operational risk dashboard.
“IPL Assurance provides up-to-date IPL lifecycle management so that operations can immediately ascertain the overall risk profile of any facility,” said Mark Carrigan, Senior Vice President of Global Operations at PAS. “This visibility from an automated single source of truth is essential to preventing critical safety incidents and supporting IEC and OSHA compliance requirements.”
by Gary Mintchell | Jun 14, 2016 | Automation, Manufacturing IT, Networking, News, Operations Management, Process Control, Technology
Second day Rockwell Automation TechED keynote speakers drilled down into the weeds a little to flesh out the High Performance Architecture and Connected Enterprise themes from day one. Unusual for a second day general session, the room was about as packed as for day one.
There is little mention of Internet of Things at this conference—it’s sort of assumed as part of the Connected Enterprise. However, speakers went from one “standard, unmodified Ethernet” comment yesterday to many mentions today.
Product group vice presidents Fran Wlodarczyk (Control & Visualization), John Genovesi (Information & Process), and Scott Lapcewich (Customer Support & Maintenance) showed how their groups supported the company vision.
Wlodarczyk discussed controllers getting faster (leading to added yield for an automotive assembly plant), improved workflows and tighter integration with control in the visualization portfolio, and how the latest motion control products are self-aware (auto-tuning) and system-aware.
Genovesi, who has learned the languages of process automation and information systems well in his time leading the area, spoke to both.
“Rockwell Automation is uniquely positioned to drive value-based outcomes”:
- Integrated Architecture that includes integrated software
- Intelligent Motor Control (smart, connected assets)
- Domain Expertise (Solution delivery)
When Rockwell finally made a real commitment to entering the process automation business, it specifically avoided the term “DCS” and used its “PAC” (programmable automation controller) terminology. A couple of years ago spokespeople made a point of saying they have a DCS. Genovesi said the Rockwell DCS brings a modern approach that established competitors cannot match. Plus, the Rockwell approach can be less expensive.
The Rockwell DCS (built on the Logix platform, but not a PLC) advantage is that it can integrate with other plant automation and control assets such as motor control.
On the Information Services side, he emphasized the partnership with OSIsoft—a company now saying it has moved from just a historian company to providing a “real-time infrastructure.” We’ve been in the Industrial Internet of Things for 35 years, the OSIsoft spokesman proclaimed.
Lapcewich listed five sets of services his group provides:
- networks & security
- product & application lifecycle
- remote monitoring & cloud analytics
- asset management & reliability
- people & asset safety
[Note: when Rockwell discusses asset management, it refers to the types of electrical and automation assets/products it provides.]
by Gary Mintchell | Apr 15, 2016 | Asset Performance Management, Operations Management
The overriding benefit we provide to enterprise business as operators of producing plants is production operational continuity—maximum output, greatest efficiency, best product margin.
Too often we get so wrapped up in our technology discussions that we forget the objectives. It’s not all about technology. It is all about using the appropriate technology to help build better businesses that serve customers well.
Editors face another problem writing articles about the industry. Marketing communications professionals delight in lining up interviews with appropriate people in their companies. The person interviewed has a story to tell. But most editors (I guess, I wasn’t one) have the theme and outline of the story already in mind, and they also have limited space. Therefore, they are looking for quotes they can pull out to support their theses, while the actual quote may only be a paragraph gleaned from a 30-45 minute interview.
So, Tim Sowell of Schneider Electric recently talked about an interview:
Basically the editor wanted to understand about “big data” being applied in a particular industry, again it was someone with a technology concept the market is throwing about vs really understanding the business / operational challenge the industry is facing.
But Sowell pointed to his recent theme about business needs:
- Operational Continuity: Maintaining their producing plants at the maximum output, with greatest efficiency, and best product margin
- Agility: to supply the market with the correct product at the right quality, and right price and the right time in an every dynamic market
- Asset Management/ Utilization: This is both fixed, mobile capital assets (non breathing assets, such as plants, trucks, ships) and the human assets (breathing assets).
I have been writing a long white paper focusing on these issues from an interoperable standards point of view. We’re looking especially at the lifecycle of critical assets. These observations from Sowell reflect the trends we’re experiencing.
We find that, as globalization increases, the buying and selling of capital assets increasingly happen, introducing of challenge of how do incorporate existing systems, automation, and practices into your overall value chain to provide the above “Operational Continuity” and “Agility”. Same when the asset is sold how you disengage it cleanly especially with IP in the products and process. Combine this with the dynamic Human Asset landscape where human assets are moving regularly between plants and locations. Causing on a site not to have the required experience to make decisions, but people are in a role of having to make the decisions. YES the asset world for both capital assets and human assets is shifting form traditional stability in both classes for the last 20 years to one of both dynamic.
He makes a crucial point. The importance of tying lifecycle asset management to operational continuity.
What are you doing with asset management?
by Gary Mintchell | Mar 23, 2016 | Automation, Internet of Things, Interoperability, Operations Management
A couple of people commented on my protocol wars post I published yesterday. I’ll address a couple of comments and then push on toward some further enterprise level conclusions.
Satish wrote: “Nice summary Gary! Standardization is a double edged sword for vendors and always there is a cautious approach. You know what happened with Real time Ethernet, Field bus & ISA 100 standards. It will take its time to mature when customers demand it and vendors are happy with the ROI. I could see how vendors make money in integration through OPC by supporting the standard but adding cost when it comes to usage of it (fine letter prints?). Probably when automation system becomes COTS system it will be a drastic change – XOM’s project with Lockheed Martin is aimed at it, am not sure!”
Satish pointed out a couple of sore spots regarding standards. Actually standards sometimes get a bad rap. Sometime they deserve it. I don’t care to get deeply into any of them, but, for example, the wireless sensor network process was one of the worst examples in the past 20 years. Eventually the industry standard WirelessHART dominated simply due to market forces. From a technology point of view, there just wasn’t that great of a difference. We can think of others. Sometimes it is simply obfuscation on the part of one vendor or another.
However, he is correct talking about the tension of standards and suppliers. Suppliers think that they can provide a better end-to-end solution by keeping everything within their sandpile. Sometimes they can. All of us who have been on the implementing end know that that is not a 100% solution. Sorry.
Cynics think that suppliers simply wish to lock in customers with an extraordinarily high switching cost. All suppliers wish to have a customer for life, but I don’t take that cynicism to the extreme. It implies much better product development and coordination than is often the case.
That said, for suppliers working with standards will almost always be Plan B.
That brings us to the owner/operator or end-user community. They mostly like Plan B. For several reasons. First, this does keep the supplier on its toes knowing that competition is just around the corner. Good service, technology, and prices can keep the customer happy. Slip up, and, well….
Further, owner/operators know that they have many more needs than one supplier can fill. And they have a multitude of legacy systems that need to be integrated into the overall system-of-systems. This also requires Plan B—interoperable systems built upon standards.
This interoperable system-of-systems, however, does not preclude best-of-class technologies and solutions within the COTS product. It only requires exposing data through standards in a standard format. That would include the RDLs and Web Services Information Service Bus Model (ws-ISBM) on the OIIE diagram. The OIIE does not care about what is within the blocks of operations, maintenance, design, and other applications. Just that data can flow smoothly from system to system.
System-of-systems
Aaron Crews of Emerson wrote on LinkedIn a little about Emerson’s work in the area. “Ok now draw a vertical line through your bus and call that a corporate firewall and it gets even more complex. Not pushing the approach as the be-all, end-all, but what Emerson has been doing with the ARES asset management platform is an interesting take on the reliability side of this.”
Let’s take Aaron’s thoughts about what Emerson is doing and consider on the next post what happens if many companies are doing something similar in different applications. Putting these all together looking at things from an enterprise point of view.
by Gary Mintchell | Mar 1, 2016 | Automation, Internet of Things, Networking, Operations Management, Safety, Wireless
Enabling Industrial Internet of Things (IIoT), Reliability, Scalability, and pursuing Real ROI encompass the current mantra of Fluke. Maybe you only know that company for its multimeters or infrared cameras. Well, there is much more behind the curtain.
The company has focused product development on mobile solutions, wireless communications, and data. This quarter’s product releases reflect all of that.
Infrared
The new Fluke Ti450 Infrared Camera takes focus to a new level of clarity with MultiSharp Focus. An out-of-focus thermal image can give you data that may lead to misdiagnosis — potentially costing you thousands — with no way to correct it once it has been captured, short of taking new images. This new infrared camera solves this problem by delivering images automatically focused throughout the field of view.
“We are excited to announce this new technology, because it makes a real difference in situations where you have objects at multiple distances that you want in focus. Places like substations, motors driving a long production line, or electrical panels with components at varying depths,” notes Chris Rayburn, thermography business director.
MultiSharp Focus is a new technology that rapidly takes multiple images and combines them to produce one in-focus image. The advanced focusing system enables users to capture an automated, focused image of multiple targets at once, delivering the image clarity needed by professional thermographers and maintenance managers to produce top-quality results and avoid costly rework.
Waveforms
Today’s industrial machinery is more reliable and efficient, but can also be more difficult to troubleshoot because of the complexities of its advanced systems. The new Fluke ScopeMeter 120B Series Industrial Handheld Oscilloscope features Connect-and-View technology that recognizes signal patterns and automatically sets up the scope’s triggering, amplitude, and time base eliminating the typical trial-and-error setup process. Once the waveform is captured, the new IntellaSet intelligent measurement detection automatically selects key measurements based on the acquired waveform type and displays the most relevant measurement values (for example, Vrms and Hz for a line voltage signal, or Vpeak-peak and Hz for a square wave), helping technicians easily identify and characterize potential signal faults.
The 120B Series also features Event Capture function that captures and identifies elusive intermittent events and lists all those events that exceed a predetermined threshold. This lets technicians identify key events quickly, rather than combing through large data sets, reading by reading.
Fluke Connect
The Industrial Internet of Things is all about connections and data. As part of Fluke Connect— a system of wireless test tools that communicate via the Fluke Connect app, or Fluke Connect Assets software, a cloud-based solution that gathers measurements to provide a comprehensive view of critical equipment status — the 120B Series can automatically record waveform data to the Fluke Connect app on smartphones or tablets ensuring accuracy and eliminating manual recording of data. Those measurements are then wirelessly uploaded to the cloud and can be combined with measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues, increasing productivity in the field. Storing then comparing and contrasting waveforms of specific asset test points over time enables maintenance engineers to better identify and troubleshoot conditions that can lead to failures.
Work Orders
Fluke introduces Work Orders, the latest enhancement to the Fluke Connect Assets, an asset management software solution that works with the Fluke Connect system of wireless test tools. Using this new Fluke Connect Assets feature maintenance managers can:
- View complete work order history coupled with measurement data related to a specific plant asset
- Create work orders from anywhere
- Confidently assign the job to the appropriate technician and balance the task with other work orders in the system.
Technicians are provided with actual measurement data right in the work order allowing them to better understand the problem and work instructions.
The Fluke Connect system allows entire maintenance teams to capture and wirelessly share data via their smartphones. Using the AutoRecord feature measurements are transferred directly from Fluke Connect wireless test tools – eliminating transcription errors – and can be uploaded to FlukeCloud storage. Measurements can be assigned to a specific asset for sharing and analysis. Technicians can collaborate with their colleagues to discuss problems while sharing data and images in real time with ShareLive video calls, which speeds problem solving, decision-making and approvals.
Clamp Meters
Often the most frustrating task for electricians and maintenance technicians is to troubleshoot intermittent faults because they rarely occur at convenient times. The new Fluke Connect-enabled 370 FC Series Clamp Meters log measurements to pinpoint intermittent faults precisely without the need for the technician to be present. Those measurements are then wirelessly transmitted to the Fluke Connect app on smartphones or tablets and automatically uploaded to the cloud, keeping technicians outside the arc flash zone and away from dangerous moving machinery, improving safety.
The CAT IV 600 V, CAT III 1000 V safety-rated clamp meters offer advanced troubleshooting performance to capture a wide range of measurements with a single tool, including:
- Proprietary in-rush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it;
- Integrated variable frequency drive low pass filter (376 FC and 375 FC models only) for accurate motor drive measurements;
- True-rms voltage and current for accurate measurements on non-linear signals;
- 500 mV dc measurement range to interface with other accessories (376 FC and 375 FC models only);
- Expanded measurement range to 2500 A ac with the iFlex flexible current probes, which provide access to large conductors in tight spaces.
As part of Fluke Connect— the industry’s largest system of software and more than 30 wireless test tools — technicians can wirelessly transmit measurement data from the 370 FC Series clamp meters and other test tools to their smartphones for secure storage on the Fluke Cloud and team access from the field. With the Fluke Connect smartphone app, technicians can combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues with ShareLive video calls, increasing productivity in the field.
